6.6.7 Packet Tracer - Configure Pat.pka ●

Objective: Get a small office network online using a single public IP address with PAT.

R1(config)# interface g0/0 R1(config-if)# ip nat inside R1(config)# interface s0/1/0 R1(config-if)# ip nat outside Which traffic should be translated? All traffic from the LAN.

Then check translations:

Have questions or corrections? Drop them in the comments.

R1(config)# access-list 1 permit 192.168.1.0 0.0.0.255 Here’s the money line — notice the overload keyword. That enables PAT.

R1# show ip nat translations You should see something like: