Have a different error code? If your lights are flashing alternately (one then the other), that is a paper feed jam. If they are flashing together (sync), that is the waste ink counter. Reset wisely.
If your printer was flashing the error after 8 years of heavy use, you have a ticking time bomb. The ink will eventually leak out of the bottom of the printer, ruining your desk and potentially shorting the power supply.
Epson programmed a inside the printer’s EEPROM. When that counter hits a specific number (usually around 15,000 to 20,000 pages or 50 power cleanings), the printer hard-locks itself. Epson Stylus T10 T11 Working Resetter
The real solution? The . What is the “Resetter”? The “Epson Stylus T10/T11 Resetter” is a misnomer. It isn't a physical dongle (usually). It is a piece of proprietary Windows software called the Adjustment Program (AdjProg) .
Let me save you $50 and a trip to the repair shop: The Ink Pad Lie (And Why Epson Stops You) Here is the technical reality most people don’t know: Your Epson Stylus T10/T11 has a “Waste Ink Pad” (also called the Ink Absorber). Every time you clean the print head, a small amount of ink is pumped into a sponge at the bottom of the chassis. Have a different error code
Resetting these models is actually safer than resetting a dye-based model, because the pigment ink dries into a solid chunk rather than leaking as a liquid. The Epson Stylus T10/T11 Working Resetter is not a hack. It is a recovery tool . Epson puts this software in their service manuals (not for public release). Using it returns your printer to the exact state it was in the day you bought it—full sponge and all.
This software speaks directly to the printer’s maintenance port (not the standard print driver port). It bypasses the normal queue and reads the counters. More importantly, it writes zeros back to the "Protection Counter." Reset wisely
The official solution? Replace the sponge and pay Epson $100 for a mainboard reset.