Huayu Rm-l1316 Setup -

Here is the arcane knowledge: The BIOS has no PWM control. That fan will run at 100% all the time. If you want it quiet, you need to physically mod a resistor into the 5V line. Once you boot into your OS, Windows Update will fail to find half the drivers. You need the Intel Bay Trail chipset driver package.

The default setting is often or RAID . Why? Because Huayu assumed you were booting from a CompactFlash card or a legacy HDD from 2010. huayu rm-l1316 setup

Look closely at the power header. You’ll see a (5.5mm x 2.5mm) soldered directly to the I/O plate, or a 4-pin ATX (P4) connector. Crucially: This board expects a clean 12V DC input. Do not plug a 19V laptop charger into it unless you enjoy watching magic smoke escape. Here is the arcane knowledge: The BIOS has no PWM control