In , the wood is ground against a rotating stone. This method yields a high volume of pulp – up to 95% of the wood becomes paper – but the resulting product is relatively low quality, yellowing quickly due to residual lignin. This type is typically used for newsprint and telephone directories.
The third stage is . Here, the slurry passes through screens of varying mesh sizes to remove contaminants like staples, plastic films, and glue. Following this, a centrifugal cleaning process spins the pulp to remove heavier objects, such as paper clips and glass fragments. paper production and recycling ielts listening
The fifth stage is , where the recovered fibres are beaten to swell and roughen them, improving their ability to bond. Finally, stage six: paper making , where the cleaned pulp is diluted, spread onto a wire mesh screen to drain water, pressed between rollers, and then heated to dry. In , the wood is ground against a rotating stone