Predator Sense Download Triton 300 -

Hi all,

I'm using ST's CubeMX implementation on a F4 discovery board. I use ST's USB middlewares with FreeRTOS.

When I get a special OutputReport from PC side I have to answer nearly immediately (in 10-15 ms). Currently I cannot achieve this timing and it seems my high priority tasks can interrupt the USB callback. What do you think, is it possible? Because it's generated code I'm not sure but can I increase the priority of the USB interrupt (if there is any)?

Thank you, David

10 to 15 ms is very slow, so I'm sure its possible.

Where is the USB callback function called from? If it is an interrupt then it cannot be interrupted by high priority RTOS tasks. Any non interrupt code (whether you are using an RTOS or not) can only run if no interrupts are running.

Without knowing the control flow in your application its hard to know what to suggest. How is the OutputReport communicated to you? By an interrupt, a message from another task, or some other way?

The callback which receive the data from PC is called from the OTGFSIRQHandler (it's the part of the HALPCDIRQHandler function). I think the problem is SysTickHandler's priority is higher than OTGFSIRQHandler and it's cannot be modified, but the scheduler shouldn't interrupt the OTGFSIRQHandler with any task handled by the scheduler. Am I wrong that the scheduler can interrupt the OTGFS_IRQHandler?

You can’t change the fan curve. The CPU temperature is a mystery. And that Turbo button—the one that turns your slim laptop into a jet engine—does nothing.

Type in that 11- or 22-digit number. This is critical—using the wrong model will break your fan controls.

You’ve just finished wiping the dust off your Acer Predator Triton 300 . Maybe you’ve performed a clean install of Windows to breathe new life into it, or perhaps the factory overclock just feels sluggish. You press the power button. The RGB keyboard cycles through its default rainbow wave. The fans whisper at idle. Everything works. But something is missing.

Navigate to acer.com > Support > Drivers and Manuals .

Choose Windows 10 or Windows 11 (most Triton 300s support both).

You need . The Hunt for the Right Installer Here is the golden rule for the Triton 300: Do not use the generic Predator Sense from the Microsoft Store. If you try, you will likely see the dreaded "Unsupported Device" error. The Triton 300 requires the OEM-specific version tied to your exact model number (e.g., PT315-53, PT317-65X). How to Download Safely Step 1: Find your Service Tag Flip your Triton 300 over. Look for the sticker that says "SNID" or "Model No."

With it, you have a predator.

Thank you for the answer, I think I'm a bit confused with the Cortex ISR priorities :-) What I can observe is if I use a much higher osDelay in my high priority task I can respond for the received USB message much faster. This is why I think tasks can mess up with my OTG interrupt.